These Glove Liners are made to the highest specification from a fine woven nylon and are a high quality product.
They have had several successful years in the German market, where they have proved to be both effective and, most importantly, reliable.
These gloves come with a variable Manual Temperature Control - the maximum setting is for bringing the gloves up to heat, when the control is then turned down for comfort.
There is a choice of straight or coiled connecting cables: - straight for feeding down sleeves with the Control on the person or coiled for use with the Control mounted on the bike eg; on the handlebars.
For Liners, it is recommended to use the down the sleeve method as the cables then do not need to work they way in around the outer gloves.
• Porelle Membrane
• Waterproof
• Breathable
• Highly Durable Teflon coated wires
• Manual Control - 0 to 48w (4.0 amps) consumption per pair
• Complete with control switch, cables and power lead to connect to battery
• 12 volt only
Heated Glove Liner sizing chart
Please note - these glove liners are designed to be worn with outer gloves, which will need to be large enough to accomodate them - as a general rule, you should expect the outer glove to be around one size larger.
The measurement required is the Circumference of the hand measured around the knuckles of a flat, relaxed, hand (not the finger knuckles)
As a general guide, for fractions of an inch measured, Round Down
6" - XS
7" - S
8" - M
9" - L
10" - XL
11" - XXL
******************
Back to Product
|
